The first thing we need to do is to connect the lights to your camera, for this we are going to need what is called a PC Sync port. On most Canon DSLR’s the PC Sync port is on the left side of the camera under a rubber flap. In the image here you can see the PC Sync port and the end of a PC Sync cable. In my typical setup I will have the main light plugged into the PC Sync port to fire it and the other lights will automatically fire at the same time because they have a built-in optical slave that will fire the flash when another flash is detected. Since this happens far faster then the mechanical shutter, the effect is that all of the lights fire at exactly the same. There is a limit of how fast the lights will sync to the camera but we will address that in a moment.
If you are unlucky enough to not have a PC Sync port on your camera then you will need to purchase a hot shoe adapter. The recommended one is the Weim Hot Shoe Adapter which sells for about $50 at most places. This will got into your camera’s hot shoe (when an acessory flash plugs in) and has a PC Sync output port on it.
