PHOTO GEAR > Canon EOS 40D Firmware Update 1.1.1
« Working with the Lucisart plugin and selections in photoshop
Nikon D90 Review »

Canon EOS 40D Firmware Update 1.1.1

Canon EOS 40D Firmware Update 1.1.1

1.  Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera’s LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient.


2. Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera’s LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.
3. Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera’s custom Picture Styles (Emerald, etc.), which have been downloaded from Canon’s Web site and registered under User Def. 2 or User Def. 3.
4. Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite.
5. Enables an external flash connected to the camera’s synchro terminal to fire even when the camera’s built-in flash is popped up.


continue


[ Share on Facebook ]
« Working with the Lucisart plugin and selections in photoshop
Nikon D90 Review »

Share / Bookmark
SubscribeBloglinesDiggdel.icio.usFacebookRedditStumbleUpon

Related Posts :

  • This firmware update (Version 1.0.8) incorporates the following improvements and fixes. Fixes a phenomenon in which Image Stabilization operation emits a sound when certain buttons are pressed, with the EF-S 55-250mm f/4-5.6 IS lens attac ...

  • Firmware Version 1.0.6 incorporates the following changes. 1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the busy indication remains lit in the viewfinder. 2. The ...

  • Firmware Version 1.0.7 incorporates the following changes. 1. Corrects a phenomenon where captured images may tend to appear somewhat magenta depending on the shooting scene. 2. Fixes incorrect indications on the Arabic, Romanian, Spanish ...

  • Canon : 1. Corrects a phenomenon in which an image becomes overexposed when C.Fn.II-3 Highlight tone priority is set to “1” together with other camera settings. (This correction has already been incorporated in the Version 1.0.2 and later firmwa ...

  • Firmware Version 1.2.4 incorporates the following improvements and fixes. 1. Supports the WFT-E4 II wireless file transmitter that was released in December 2009. 2. Corrects a phenomenon in which visible noise may appear in images taken b ...

  • - When Custom Setting a4 Focus tracking with lock-on was set to Off in Continuous-servo AF, the lens drive moved gradually without achieving focus.  This issue has been resolved. - When the Speedlight SB-800 was mounted on the camera with fl ...

  • The closest competitors to the Coolpix P6000 are the Canon PowerShot G10 and Panasonic Lumix DMC-LX3. The other cameras on the list don't have the hot shoe offered by those cameras, but they still offer high resolution CCDs and manual control ...

  • Firmware Update Version 1.0.7 improves and mitigates the following two types of image quality phenomena that occur under certain shooting conditions. "Black dot" phenomenon (the right side of point light sources become black) V ...

  • In the Version 2.0.4 firmware, the following phenomena that occurred with the Version 2.0.3 firmware (which was to enhance the movie functions) have been corrected. * There was a phenomenon in which the manual recording settings made in C1 ...

  • The following improvements have been made in version 2.01: - Geodetic information is now displayed in ViewNX Ver. 1.2.0 or later and Capture NX 2 Ver. 2.1.0 or later for images captured with the GPS Unit GP-1 mounted on the camera. - Auto ...

  • EOS-1D Mark III Firmware Update Version 1.3.0 Firmware Version 1.3.0 incorporates the following improvements. 1. Supports the WFT-E2 II wireless file transmitter that was released in December 2009. Firmware Version 1.3.0 is for camer ...

  • The firmware update Ver.1.10 incorporates the following issues. 1.The performance of Super Intelligent Flash has been improved. 2.Finnish, Norwegian, Danish or Slovak has been added as selectable languages for On Screen Display. •Precaut ...

  • This firmware update (Version 1.0.6) incorporates the following enhancement. 1. Firmware Version 1.0.6 enhances the AF tracking performance.* *AF performance has been enhances for receding subjects and for subjects that are approaching ...

  • The first thing I noticed about the 5D Mark II once out of the box was that the camera feels a little more substantial than the original 5D. I believe it's a little more rigid and slightly heavier. I didn't do a crash test or weigh the camera ...

  • The software changes are as outlined below; * The addition of three effect shooting functions * The addition of a Cross Processing function support to the green button * Improved accuracy of the Battery Level Indicator with improved stab ...


Subscribe to our feed for news & updates !

Enter your email address :

Related posts:

Canon EOS 40D Firmware Update Version 1.0.8. This firmware update (Version 1.0.8) incorporates the following improvements and fixes. Fixes a phenomenon in which Image Stabilization operation emits a sound when certain buttons are pressed, with the...

Canon EOS 50D Firmware Update 1.0.3 and Nikon D300 Firmware Update 1.10 Canon : 1. Corrects a phenomenon in which an image becomes overexposed when C.Fn.II-3 Highlight tone priority is set to “1” together with other camera settings. (This correction has...

Canon EOS 50D Camera Firmware Update Version 1.0.7 ...

Canon EOS 1000D Firmware 1.0.6 update Firmware Version 1.0.6 incorporates the following changes. 1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the...

Canon EOS 5D Mark II Firmware 2.0.3 update adds 24 and 25 frames per second recording to the camera’s video function Canon adds 24 and 25fps HD Movie recording to the EOS 5D Mark II with Firmware 2.0.3 United Kingdom / Republic of Ireland, 2nd March 2010 – Canon today...

PENTAX K-x Firmware 1.01 Update The software changes are as outlined below; * The addition of three effect shooting functions * The addition of a Cross Processing function support to the green button *...

Canon EOS-1D Mark IV Firmware 1.0.6 Update This firmware update (Version 1.0.6) incorporates the following enhancement. 1. Firmware Version 1.0.6 enhances the AF tracking performance.* *AF performance has been enhances for receding subjects and for subjects...

AutoFocus fix and firmware update for Canon EOS-1D cameras Canon is aware that some owners of the EOS-1D Mark III and EOS-1Ds Mark III digital SLR cameras have been experiencing problems with their cameras concerning the accuracy of...

Tags: ,