PHOTO GEAR > Nikon D3 Firmware Update 2.01
« Genuine Fractals 6 Review
Nikon D700 Firmware Update 1.01 »

Nikon D3 Firmware Update 2.01

Nikon D3 Firmware Update 2.01

The following improvements have been made in version 2.01:

- Geodetic information is now displayed in ViewNX Ver. 1.2.0 or later and Capture NX 2 Ver. 2.1.0 or later for images captured with the GPS Unit GP-1 mounted on the camera.
- Autofocus-response performance in focus mode C (Continuous-servo AF mode) with relatively dark subjects has been increased.
- When the AF-ON button is pressed, the monitor turns off and a focus point can now be selected using the multi selector.
- Photo information displayed in full-frame playback has been modified as follows:
HI-, LO- has been changed to Hi, Lo



WARM TONE has been changed to WARM FILTER
COLOR CUSTOM has been changed to COLOR BALANCE
- Manamah, displayed in the Time zone options for the World time item in the setup menu, has been changed to Manama.
- An issue that, in extremely rare cases, resulted in noticeable black dots in images captured with Long exp. NR in the shooting menu set to On has been resolved.
- When the Speedlight SB-800 was mounted on the camera with flash mode set to Distance-priority manual (GN) mode, and then the exposure meters were reactivated or the camera was turned on, the distance information displayed on the SB-800 changed.  This issue has been resolved.
- An issue that, in some rare cases, caused images captured with the following lenses to be under-exposed, has been resolved.
AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED
AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D ED (5.0x)

Nikon D3 Firmware Update 2.01 (Windows)
Nikon D3 Firmware Update 2.01 (Mac)


[ Share on Facebook ]
« Genuine Fractals 6 Review
Nikon D700 Firmware Update 1.01 »

Share / Bookmark
SubscribeBloglinesDiggdel.icio.usFacebookRedditStumbleUpon

Related Posts :

  • - When Custom Setting a4 Focus tracking with lock-on was set to Off in Continuous-servo AF, the lens drive moved gradually without achieving focus.  This issue has been resolved. - When the Speedlight SB-800 was mounted on the camera with fl ...

  • Several updates from Nikon : Nikon D3 Firmware Update 1.10 (Windows) Nikon D3 Firmware Update 1.10 (Mac) Nikon Capture NX 1.3.3 (Windows) Nikon Capture NX 1.3.3 (Mac) Nikon ViewNX 1.0.4 (Windows) Nikon ViewNX 1.0.4 ( ...

  • The following improvements have been made in version 5.02 - With uninterrupted shooting with the SB-900 set to i-TTL mode, images captured just before the flash ceased firing were sometimes overexposed. This issue has been resolved.  By r ...

  • Canon : 1. Corrects a phenomenon in which an image becomes overexposed when C.Fn.II-3 Highlight tone priority is set to “1” together with other camera settings. (This correction has already been incorporated in the Version 1.0.2 and later firmwa ...

  • "This download provides software for upgrading D40 A firmware to v1.11 and B firmware to v1.11. When performing this Firmware Upgrade, be sure to upgrade both A and B firmware. Be aware that operation of your D40 is not guaranteed if either ...

  • EOS-1D Mark III Firmware Update Version 1.3.0 Firmware Version 1.3.0 incorporates the following improvements. 1. Supports the WFT-E2 II wireless file transmitter that was released in December 2009. Firmware Version 1.3.0 is for camer ...

  • Firmware Version 1.2.4 incorporates the following improvements and fixes. 1. Supports the WFT-E4 II wireless file transmitter that was released in December 2009. 2. Corrects a phenomenon in which visible noise may appear in images taken b ...

  • Firmware Version 1.0.7 incorporates the following changes. 1. Corrects a phenomenon where captured images may tend to appear somewhat magenta depending on the shooting scene. 2. Fixes incorrect indications on the Arabic, Romanian, Spanish ...

  • # Adds support for D300s, D3000, Coolpix S570, S640, S70, and S1000pj # A Send notification mail to my address (Email ID) checkbox has been added to the Share Settings dialog displayed with the my Picturetown upload function. # New Album is ...

  • Ricoh Co., Ltd. (President and CEO: Shiro Kondo) announced today that it will release on December 1 the first function-enhancing firmware update for its GR DIGITAL III, a high image quality compact digital camera launched in August 2009. ...

  • This firmware update (Version 1.0.6) incorporates the following enhancement. 1. Firmware Version 1.0.6 enhances the AF tracking performance.* *AF performance has been enhances for receding subjects and for subjects that are approaching ...

  • Firmware Update Version 1.0.7 improves and mitigates the following two types of image quality phenomena that occur under certain shooting conditions. "Black dot" phenomenon (the right side of point light sources become black) V ...

  • A new firmware update is released for Panasonic’s premium manual compact camera DMC-LX3. Firmware version 2.1* supports several new functions and improves various performances to elevate shooting convenience and fun. The firmware also rectifi ...

  • 1.  Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera’s LCD dat ...

  • Modified the following phenomena. 1 With the combination of the following conditions, it will not properly appear the image in the position display window that is shown when you playback with enlarged. - [Auto Rotate] ON - Rotate the camer ...


Subscribe to our feed for news & updates !

Enter your email address :

Related posts:

Canon EOS 50D Firmware Update 1.0.3 and Nikon D300 Firmware Update 1.10 Canon : 1. Corrects a phenomenon in which an image becomes overexposed when C.Fn.II-3 Highlight tone priority is set to “1” together with other camera settings. (This correction has...

Nikon D700 Firmware Update 1.01 - When Custom Setting a4 Focus tracking with lock-on was set to Off in Continuous-servo AF, the lens drive moved gradually without achieving focus.  This issue has been resolved....

Nikon SB-900 Firmware Update 5.02 ...

Ricoh GR Digital III Firmware Update Ricoh Co., Ltd. (President and CEO: Shiro Kondo) announced today that it will release on December 1 the first function-enhancing firmware update for its GR DIGITAL III, a high...

Canon EOS-1D Mark IV Firmware 1.0.6 Update This firmware update (Version 1.0.6) incorporates the following enhancement. 1. Firmware Version 1.0.6 enhances the AF tracking performance.* *AF performance has been enhances for receding subjects and for subjects...

Pentax K-7 Camera Firmware Update 1.01 * Added [Operate at AF point “SEL”] on [Custom] menu and it can be selected either [1 Calling Function Preference] or [2 Select AF point Preference]. When selected [2...

Canon EOS 1000D Firmware 1.0.6 update Firmware Version 1.0.6 incorporates the following changes. 1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the...

AutoFocus fix and firmware update for Canon EOS-1D cameras Canon is aware that some owners of the EOS-1D Mark III and EOS-1Ds Mark III digital SLR cameras have been experiencing problems with their cameras concerning the accuracy of...

Tags: , ,